Quick Install Guide Fixed Dome Network Camera This document will guide you through the basic installation process for your new D-Link Network Camera.
DCS-6112/DCS-6113 Quick Install Guide This installation guide provides basic instructions for installing the DCS-6112/DCS-6113 Network Camera on your network. For additional information about how to use the camera, please see the User Manual which is available on the CD include in this package or from the D-Link support website. Installation Steps 1. 2. 3. 4. 5. 6. Verify the package contents against the list below.
2.
Light Sensor Judges lighting conditions and switches between day mode and night mode accordingly (Control IR-LED and ICR on/off ) (DCS-6113 only). Infrared LEDs Used to illuminate the camera's field of view at night (DCS-6113 only). Lens Fixed focus lens. 3-Axis Mechanism Adjust the camera’s image to achieve the desired orientation. Ethernet (PoE) Port RJ-45 connector for an Ethernet cable which can also be used to power the camera using PoE.
3. Hardware Installation Mounting to a Ceiling or a Wall 1. Locate an area on the ceiling or wall which is suitable of supporting the weight of the camera. 2. Attach the alignment stencil to the ceiling or wall. 3. Drill two pilot holes where the holes of the alignment stencil are located. 4. Insert the supplied plastic anchors into the drilled holes, and align the holes at the base of the camera with the plastic anchors. 5.
General Connection (without PoE) Connect the network camera to a switch or router via an Ethernet cable then connect the supplied power cable from the camera to a power outlet. Connection with a PoE Switch If using a PoE switch or router, connect the network camera to the switch or router via an Ethernet cable, which will provide both power and data transmission over a single cable.
4. Configuration with Wizard Insert the DCS-6112/DCS-6113 CD into your computer's CD-ROM drive to begin the installation. If the autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive. Click Setup Wizard to begin the installation. After clicking Setup Wizard, the following window will open. Click Next to continue. Click Yes to accept the License Agreement.
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, a valid IP Address will be displayed. If your network does not use a DHCP server, the network camera's default static IP 192.168.0.20 will be displayed. Click the Wizard button to continue. Enter the Admin ID and password.
Viewing Camera via Web Browser Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled "Link" to access the web configuration. The Setup Wizard will automatically open your web browser to the IP address of the camera. Enter admin as the default username and leave the password blank. Click OK to continue. This section shows your camera’s live video.
5. Adjust the viewing angle Loosen the pan screw and turn the lens module left and right until the desired position is achieved. Tighten the pan screw once completed. Loosen the tilt screws on both sides of the camera and then turn the lens module up and down until the desired position is achieved. Tighten the tilt screws once completed. Loosen the image adjustment screw and turn the lens to adjust the network camera’s image until the desired orientation is achieved.
Notes D-Link DCS-6112/DCS-6113 Quick Install Guide 11
Technical Support D-Link’s website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone. United States Telephone (877) 354-6555 World Wide Web http://support.dlink.com Canada Telephone (877) 354-6560 World Wide Web http://support.dlink.ca Version 1.0 October 7, 2011 Copyright ©2011 D-Link Corporation/D-Link Systems, Inc. All rights reserved.
