User manual

8D-Link DCS-6110 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
DC Power Connector
The DC power input connector is
located on the side panel of the
DCS-6110 labeled 12VDC with a
single socket to supply power to
the network camera.
Ethernet Cable Connector (PoE)
The network camera’s side panel features an RJ-45
connector for connections to 10Base-T Ethernet
cabling or 100Base-TX Fast Ethernet cabling. This
network port supports the NWay protocol, allowing
this network camera to automatically detect or
negotiate the transmission speed of the network.
The Ethernet port can also be used to power the
camera by using a PoE switch.
Reset Button
Reset is initiated when the reset button is
pressed once and held until the power LED
flashes through its cycle twice.
DI/DO
Focus Controller
Adjustment Screw
Tilt Screw
Pan Screw
Zoom Controller