User manual

64D-Link DCS-6110 User Manual
Section 3 - Configuration
Enable remote log:
Log server settings:
IP Address:
Port:
Save:
Current Log:
Enabling this feature so that the camera can send camera
log files to a remote server.
Configure the setting for the log server.
The IP address of the remote server.
The port number of the remote log server. The default
port is 514.
Save the setting.
The system log file that displayed by the system. The
content of the file reveals useful information about
camera configuration and connectivity status after the
camera boots up.
Logs
This page displays the log information of your camera. You can configure a remote log server so that you can view your log details
remotely.