User manual

59D-Link DCS-6110 User Manual
Section 3 - Configuration
DI and DO:
Digital input trigger
condition:
Digital output:
Setting for both Digital input signal and digital output
signal can be configured here.
Please select from “High” or “Low” for digital input
trigger condition. When external device connect to
the digital input pins, the state of the voltage will be
monitored. (Max. Input 500mA, 12Vdc)
Select Grounded or Open to define normal status of
the digital output. The camera will show whether the
trigger is activated or not.
DI and DO
The I/O connector provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting such external
alarm devices as IR-Sensors and alarm relays to the network camera.