User manual

56D-Link DCS-6110 User Manual
Section 3 - Configuration
Event name:
Enable this event:
Priority:
Delay:
Trigger:
Video motion
detection:
Periodic:
Digital input:
System boot:
Time:
Trigger D/O:
Move to preset
location:
Unique name for the event.
Select this to activate this event.
Set the priority for this event and the event with higher priority
will be executed first.
The delay time before checking next event. It is being used for
both events of motion detection and digital input trigger.
The input type that triggers the event.
Motion is detected during live video monitoring. Select the
windows that need to be monitored.
The event is triggered in specified intervals. The unit of trigger
interval is minute.
External trigger input to the camera.
The event is triggered when the system boot up.
Either “Always” or input the time interval.
Check it to trigger digital output for specific seconds when
event is triggered. The default actions are triggering the D/O
and storing the media on a CF card.
If there is a server(s), user can select the available server(s)
from Move to preset location.
Add Event
Up to 3 events with its own settings can be created and configured here. Meanwhile, you can schedule the events here.