User manual

51D-Link DCS-6110 User Manual
Section 3 - Configuration
Application
A typical application is that when a motion is detected, the DCS-6110 Network Camera sends buffered images to a FTP server or via
e-mail as notifications. For example, as seen in the illustration below, an event can be triggered by many sources, such as motion
detection or external digital input devices. When an event is triggered, you can specify what kind of action will be performed. You
can configure the Network Camera to send snapshots or videos to your email address or FTP site.
To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what
action shall be performed when a trigger is activated.
ex.
Motion detection,
Periodically, Digital input,
System reboot
Event Condition
ex.
Snapshot, Video Clips
ex.
Email, FTP
Media
(what to send)
Server
(where to send)
Action