User manual

47D-Link DCS-6110 User Manual
Section 3 - Configuration
1. Click New to add a new motion detection window.
2. Enter a name in the Window Name field.
3. Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the Sensitivity and Percentage
slide bar.
4. Click Save to apply the changes.
5. Select Enable motion detection to activate motion detection.
Note: Drag and drop to resize the window and click X to close the window.
The Percentage Indicator will rise or fall depending on the image variation. When motions are detected by the Network Camera and
are judged to exceed the defined threshold, a red bar rises. Meanwhile, the motion detection window will be outlined in red. Photos
or videos can be captured instantly and configured to send to the remote server (Email, FTP) by utilizing this feature as a trigger
source.
A green bar indicates that even though motions are detected, the event will not be triggered because the image variations are still
falling under the defined threshold.
Percentage = 30%
To enable motion detection, follow the steps below: