User manual

46D-Link DCS-6110 User Manual
Section 3 - Configuration
Enable motion
detection:
Window name:
Sensitivity:
Percentage:
New:
Save:
Check this option to turn on the motion detection.
Create your own name for the monitored area/ window.
It will show at the top of the motion window.
Set the measurable difference between two sequential
images that would indicate motion.
Set the amount of motion in the window being monitored
that is required to initiate a motion detected alert. If this
is set to 100%, this means that motion is detected within
the whole window to trigger a snapshot.
Note: Setting a higher sensitivity and a lower
percentage will make any motion more easily.
Click to add a new window. A maximum of three motion
windows can be opened simultaneously. Use your
mouse to drag the window frame to re-size or the title
bar to move. Clicking on the ‘x’ at the upper right corner
of the window will close the window.
Save the related settings of that window.
Motion Detection
Enabling Motion Detection will allow up to three windows that can be created with different settings for monitoring. This allows your
camera to serve as a security device that will record when motion is detected.