User manual

37D-Link DCS-6110 User Manual
Section 3 - Configuration
LAN Settings:
DHCP:
Static IP Client:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP
Presentation:
Settings for your local area network.
Select this connection if you have a DHCP server running on your network and
would like a dynamic IP address to be updated to your camera automatically.
You may obtain a static or fixed IP address and other network information from
your network administrator for your camera. A static IP address will ease you for
accessing your camera in the future.
The fixed IP address.
The default value is “255.255.255.0.” Used to determine if the destination is in
the same subnet.
The gateway used to forward frames to destinations in a different subnet. Invalid
gateway settings may cause the failure of transmissions to a different subnet.
Primary domain name server that translates names to IP addresses.
Secondary domain name server to backup the primary one.
Allows a user to find, view and control this camera via a presentation page or
“Network Neighborhood” without configuration.
How does UPnP work?
UPnP
TM
networking technology provides automatic IP configuration and dynamic
discovery of devices added to a network. Services and capabilities offered by
networked devices, such as printing and file sharing, are available among each
other without bothersome network configuration. In the case of Network Cameras,
you will see Network Camera shortcuts at My Network Places.
Network Setup