User manual

28D-Link DCS-6110 User Manual
Section 3 - Configuration
Stream Options:
Protocol Options:
UDP Protocol:
UDP Unicast:
UDP Multicast
TCP:
HTTP Protocol:
Record Options:
You can select which video stream profile to use.
There are 4 protocols for you to choose for the video
streaming.
This is recommended because it is an ideal protocol for
transmitting real-time audio and video data, which can
tolerate some lost packets.
Will stream to a single computer.
Will stream to multiple computers using multicast.
Provides higher quality video streaming than UDP does.
It provides error correction and guarantees packet to be
delivered to client. However, transmission speed will be
reduced.
Offers the highest image and video quality. However, packet
losses will diminish image quality when bandwidth becomes
restricted. If the network is protected by a firewall and it
opens HTTP port (80) only, HTTP protocol must be selected. In
this mode, audio is disabled and only video can be viewed.
UDP connections will not be available to remote users if all
four ports have not been forwarded (as shown on page 32).
Only the HTTP port must be forwarded for remote users to
make an HTTP connection (video only).
Allows the user to specify a destination folder and prefix filename for the recorded video.
Client Setup
You may configure and select the setting for your media streaming and recording