User manual

15D-Link DCS-6110 User Manual
Section 3 - Configuration
Click Manual Setup
Configuring Your Camera with the Installation Wizard
If the D-Link Installation Wizard window does not pop up after completion of software installation, click on the icon that was
created in your Windows Start Menu.
The Installation Wizard will appear and show the MAC address and IP address of the DCS-6110, which may appear to be different
from the actual address depending on what your device is connected to. If you have a DHCP server on your network, there will
be a valid IP address displayed here.
Note: A DHCP server is a device that supplies the same IP address.
To begin setup, single-click on the DCS-6110 located in the camera list and
click Manual Setup located on the left of the Installation Wizard.