User manual

10D-Link DCS-6110 User Manual
Section 1 - Product Overview
Hardware Installation
When Mounting to a Ceiling
Find a suitable place to install the camera using the installment stencil. Place the camera
at the desired operating location and insert the screws through the two holes located at
the base of the camera. Use screwdriver to tighten and secure.
When Mounting to a Wall
Find a suitable place to install the camera by using the installment stencil to find a desired
operating location on the wall. Drill two pilot holes where the holes of the installment
stencil are located. Insert the supplied plastic anchors into the drilled holes, and align
the holes at the base of the camera with the plastic anchors. Once aligned, insert the
provided screws through the holes with screwdriver to tighten and secure.