User manual

55D-Link DCS-5605/DCS-5635 User Manual
Snapshot
When select the option, you can send a still image from this unit as an attachment of an E-mail or to an FTP server.
Select the Motion Detection option to transfers images to the specied FTP site or E-Mail address when there are
motions detected. Select the D/I Signal 1 option to transfers images to the specied FTP site or E-Mail address
when Digital Input 1 is active.
Select this option to record snapshots all the time.
Select this option to record snapshots based on the specied time period.
E-Mail Setting
If you select the option, the current still image is captured and an E-mail with the captured image le attached is
sent to the recipient E-mail address.
This will be the username that was given by your ISP (Internet Service Provider). This could be smith or smith@
yourisp.com depending on your particular ISP.
The password that you set up to view your e-mail account.
The host name of the e-mail server (for example, smtpserver.yourdomain.com).
The sender’s email address that appears in the email alert (for example, [e-mail]). Notication will be sent
to this email address if the e-mails failed to be delivered to the recipient email address.
This is the email address that will receive all the captured images.
This is the port that your email SMTP service is running on. Default is 25.
FTP Setting
Send a snapshot to FTP Server.
The account name to access the FTP server.
The password that was setup with the account to access the FTP server.
Enable Snapshot:
Trigger Event:
Continuous (FTP Only):
Scheduled (FTP Only):
E-mail Address:
User Name:
Password:
SMTP Mail Server:
Sender E-mail Address:
Recipient E-mail Address:
Port:
FTP Server:
User Name: