User`s manual

V1.10

7.3. Turning On Alarms

7.3.1. Turn Off Alarms

You can turn off alarms when your security staff is on duty to

handle event. To do this, click the OFF button to turn off all alarm

settings in the Administration program.

7.3.2. Turn on Alarms

Use this function when your security staff is off duty and you need

D-ViewCam to automatically handle events. To turn on all alarm

settings, click the ON button.

7.4. Disabling an Alarm

【Step1.】 Disable a System Alarm

When a “Breach Alert” message appears at the bottom of the

Video display area, an alarm has occurred and warn user by

following methods:

(1) The text of the Relay Setting button changed to Cancel

Alarm.

(2) The most up-to-date alarm was logged in the alarm

notification log.

(3) An eMap with the device that triggered the alarm will pop up

in the eMap display area

(4) Depending on how your alarm setting, a live video of the

device may pop up in the Video Display Area.

7.5. Relay Setting (On/Off)

【Step1.】 Click Relay Setting

【Step2.】 Select the Relay Location

【Step3.】 Click Relay On or Relay Off button

Click Relay On or Relay Off to remote control Digital Output

(such as light, alarm system.)

【Step2.】 Click the Cancel Alarm button to disable the ”Breach Alert” message.

(1) The Cancel Alarm button will be replaced by a Relay Setting button.

(2) The alarm live video will disappear and the screen will return to its normal setting.