User`s manual

46
V1.10
5. PT Control Interface (DCS-5300, 5300W, 5300G, 6620, 6620G only)
5.1.1. Center PT
5.1.2. Click on the PT control interface to pan or tilt
the camera.
5.1.3. Click on the center button to move the
camera to the home position.
5.2. Button Overview
Button Use To
PT control: PT interface consist of control icons which allow user to pan/tilt the camera to 4
directions manually.
Auto Pan: to enable the PT camera auto panning
Auto Patrol: to enable the PT camera auto patrolling to the preset location
Stop: to stop PT camera’s auto-action
Preset Location: select the preset location from the dropdown list to turn the camera to the
preset location
PT Speed: to change the speed of camera movement