User`s manual

30
V1.10
8. Editing Camera Configurations
When select Camera icon in System Setup area, the buttons display in Menu Bar as follows:
Button Tip/Use To
Camera Setting: to configure IP, MAC Address, Port Number, User Name, Password associated to a selected
camera. It displays the information set in Add Camera button for further modify. For detail, please refer to Content C
7.
Remove Camera: to remove the configuration of a selected camera including the image, sensor and relay.
When select Image, Sensor, Relay icon in System Setup area, the buttons display in Menu Bar as follows:
Button Tip/Use To
Image Setting: to configure frame per second of video image for alarm recording and schedule recording, activate
schedule recording for the selected camera.
Remove Image: to remove all the configuration of a selected camera image.
Backup Recorded Files: to backup the recorded video files of a selected camera, including schedule/alarm
recording file.
Image Alarm: to set image alarm action when alarm is detected on the selected camera.
Preset Point Setting: to configure pre-defined viewing location of a Pan/Tilt camera.
Motion Detection: to specify area for detecting motion.
Image Quality: to configure the contrast, hue, brightness, saturation, compression and resolution of camera image.
Sensor Setting: to configure the setting of a selected camera sensor.