User`s manual

24
V1.10
6.2. Button overview
When you select eMap icon, Menu Bar will display the following functions:
Button Tip/Use to
Add Area: This button allows you to add a new area under eMap branch.
Remove All Area: This button allows you to remove all areas and devices that are under the eMap branch.
Save Area and Camera Setting: This button allows you to save area & camera configuration, including the
image、sensor and relay under it
Load Area and Camera Setting: This button allows you to upload area and camera configuration
When you select the Area icon, Menu Bar will display the following functions:
Button Tip/Use to
Area Setting: This button allows you to edit the name of the selected area.
Remove Area: This button allows you to remove the selected area and all devices in that area.
Load Map: This button allows you to upload a blueprint or map to the selected area.
Device Ratio: This button allows you to change the ratio of the device icons , which is displayed on the eMap
interface.
Add Camera: This button allows you to add a new camera to the area.