User`s manual

13
V1.10
C. System Admin Program
1. Running the System Admin Program (Method 1)
【Step1.】 Run the System Admin Program
Select Programs > D-Link D-ViewCam > Admin
【Step2.】 System Logon
Use ‘Admin’ as the default user name and click OK to continue
the login.
If this is the first time you login, use Admin as default user name
and leave the password blank, then click OK to log into the
system.
【Note】It is recommended to set the Admin password when
login the account for the first time. The default password of
Admin is blank. It is recommended that you change this default
password, please go to User Group section to change the
password.
2. Running the System Admin Program (Method 2)
【Step1.】 Run the Administration Program
User can also login the Admin account via click the D-ViewCam
icon locates at the Task Bar. You can run the D-ViewCam Admin
program directly by clicking the Task Bar/D-Link D-ViewCam
icon.