User`s manual
9
V1.10
Would you like to save the data and configuration files before continue
the upgrade?
1.2.2. Select Reinstall upgrade
【Step1.】 Select Reinstall and click Next.
【Step2.】 Select reserve data of D-ViewCam
v1.00 or not
If you plan to upgrade v1.10 from v1.00, you may further
decide if you want to reserve data of v1.00.
(1) If select Yes, then all data of v1.00 will be kept in v1.10,
and process the following steps.
(2) If select No, then all the Admin configuration need to
reconfigure, and repeat the B1.1 steps from 6 to10.
【Step3.】 Enter Manual Record storage
D-ViewCam v1.10 with new feature of Manual Record
function, you may change the default storage size of Manual
Record. Click Next to continue.
【Note】Recording video over a long period of time will
consume large amounts of disk space. Make sure that you
have at least 1GB disk space available if you want to use
recording function. You can still complete installation even if
you have less than 1GB free disk space.
【Step4.】 Setup Status
Show installation process status