User manual

39D-Link DCS-5222L User Manual
Section 4 - Conguration
System
Click on the Save Conguration button to save the
current conguration to your hard drive.
To load a saved configuration, click on the Browse
button to select a conguration le from your hard drive.
Then, click the Load Conguration button to load the
new conguration.
Click this button to reset all settings to their factory
defaults. If you select to reset your settings, you will
need to set up your camera again.
Clicking the Reboot button will reboot your device.
This screen allows you to save and restore the camera’s current conguration. You can also reset all settings to factory default or reboot the device.
Save to Local Hard
Drive:
Load from Local
Hard Drive:
Restore to Factory
Defaults:
Reboot Device: