User manual

27D-Link DCS-5222L User Manual
Section 4 - Conguration
Audio and Video
You may congure four video proles with dierent settings for your camera. You may also set up dierent proles for your computer and mobile
display. In addition, you may congure the audio (speakers and microphone) settings for your camera. There are three sensor output selections
(VGA, XGA, and SXGA). Do not select SXGA if you want to turn on the motion detection feature.
Note: Video Prole 3 is always set to MJPEG as the Encode Type to ensure that at least one of the Video Proles are viewable by non-IE browsers. Video
Prole 4 is for mobile devices only, and always uses MPEG-4 as the Encode Type.
Video Prole:
Encode Type:
Resolution:
FPS:
bps:
Quality:
RTSP URL:
Day/Night
Mode:
Audio Setup:
This section allows you to change the Encode Type, Resolution,
FPS, and Quality.
The compression format used when viewing your camera.
Select the desired video resolution from the drop-down menu.
The higher setting can obtain better quality. However, it will use
more resource within your network.
Select the optimal setting depending on your network status.
Please note that the higher setting can obtain better quality.
However, it will use more resources within your network.
Select the bitrate to assign the video. This is a constant bitrate. A
higher bitrate will result in better looking video at the expense of
a larger le size.
Select one of ve levels of image quality: Highest, High, Medium,
Low, and Lowest.
The URL used to connect to the camera when viewing from
QuickTime or a mobile device.
Allows you to control the IR LEDs on the front of the camera. Note
that when this option is enabled, live feed video will be in black
and white, and ICR lter will be activated.
Allows you to enable or disable and adjust the volume level of the
speaker and microphone. If you select speaker, you must attach
external speakers to the audio port on the camera.