User Manual
44D-Link DCS-5000L User Manual 44
Section 3 - Conguration
FTP
Host Name:
Port:
User Name:
Password:
Path:
Passive Mode:
Enable the
uploading of
images to an
FTP server:
Enter the IP address of the FTP server that you will be
connecting to.
Enter the port of the FTP server that you will be connecting
to.
Enter the user name of your FTP server account.
Enter the password of your FTP server account.
Enter the destination path/folder to save les to on the FTP
server.
Enabling passive mode may help you reach your FTP server
if your camera is behind a router protected by a rewall.
Enabling this will allow snapshots to be uploaded in
dierent ways:
• Choosing Always will upload snapshots continuously
based on the Image Frequency specified.
• Choosing Schedule will allow you to schedule when
to start and stop the uploading of snapshots.
• Select Motion/Sound Detection if you would like
the camera to upload images only when motion is
detected.
This section allows you to congure your camera to send snapshots and video clips to an FTP server.