User manual
34D-Link DCS-3411/3430 User Manual
Section 3 - Configuration
LAN Settings:
DHCP:
Static IP
Address:
IP Address:
Subnet Mask:
Default
Gateway:
Primary DNS:
Secondary
DNS:
Enable UPnP:
Settings for your local area network.
Select this connection if you have a DHCP server running
on your network and would like a dynamic IP address to
be updated to your camera automatically.
You may obtain a static or fixed IP address and other
network information from your network administrator
for your camera. A static IP address will ease you for
accessing your camera in the future.
The xed IP address.
The default value is “255.255.255.0.” Used to determine
if the destination is in the same subnet.
The gateway used to forward frames to destinations in
a different subnet. Invalid gateway settings may cause
the failure of transmissions to a dierent subnet.
Primary domain name server that translates names to
IP addresses.
Secondary domain name server to backup the primary
one.
Enable this setting to allow your camera to be congured
as an UPnP device in your network.
Network Setup
Use this section to congure the network connections for you camera. All relevant information must be entered accurately.