User manual

25D-Link DCS-3112 User Manual
Conguration
Network Setup
LAN Settings:
DHCP:
Static IP Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP:
Enable UPnP Port
Forwarding:
Settings for your local area network.
Select this connection if you have a DHCP server
running on your network and would like your camera
to obtain an IP address automatically.
You may obtain a static or xed IP address and
other network information from your network
administrator for your camera. A static IP address
may simplify access to your camera in the future.
Enter the xed IP address in this eld.
This number is used to determine if the destination
is in the same subnet. The default value is
255.255.255.0.
The gateway used to forward frames to destinations
in a different subnet. Invalid gateway settings may
cause the failure of transmissions to a different
subnet.
The primary domain name server translates names
to IP addresses.
The secondary DNS acts as a backup to the primary DNS.
Enabling this setting allows your camera to be congured as a UPnP device on your network.
Enabling this setting allows the camera to add port forwarding entries into the router automatically on
a UPnP capable network.
Use this section to congure the network connections for your camera. All relevant information must be entered accurately.