User manual

64D-Link DCS-3110 User Manual
Section 4 - Configuration
ICR - IR-Cut Removable(ICR) filter is a switch mechanical design
of two different sensor filters. It provides the best light conditions
both during the day and night. The following options are:
ICR
Auto:
Day Mode:
Night Mode:
Schedule Mode:
The Network Camera automatically switches
between day and night mode by judging the level
of ambient light. This mode is accessible only
when the exposure mode is set to Auto.
In this mode the Network Camera switches on
the infrared cut filter at all times, which will block
the infrared light from reaching the sensor so that
the colors are not distorted.
The Network Camera switches off the infrared cut
filter to allow the infrared light to pass through.
This helps the Network Camera to see more
clearly in low light conditions.
The Network Camera switches between day and
night mode based on a specific schedule.
Ensure to enter the starting and ending time for
the day mode. Note that the time format is [hh:
mm] and is expressed in 24-hour clock time. By
default, the starting time and ending time of day
mode are set to 07:00 and 18:00.