Installation Guide

Step 1:

Identify and mark the location where you want to

install the bracket, assuring that it is at least 20 cm

from the ceiling.

Step 2:

Using a 6 mm drill bit, drill a 25 mm deep hole over

the mark. For a plaster, drywall, or concrete wall,

insert the plastic anchor to support the screw rst.

Step 3:

Twist the supplied screw into the wall or anchor,

making sure to leave enough clearance between the

screw head and the wall.

Step 4:

Align the screw with the largest hole on the snap

mount. Slide the mount down to lock it into place.

Step 5:

Attach the back of the camera to the mount. Adjust

the angle as desired.

Camera Mounting Instructions

Snap Mount