User Manual

28D-Link DCS-2530L User Manual
Section 3: Conguration
Network Setup
Use this section to congure the network connections for your camera. All relevant information must be entered accurately. After making any changes,
click the Save Settings button to save your changes.
LAN Settings:
DHCP:
Static IP Client:
IP Address:
Subnet Mask:
Default Router:
Primary DNS:
Secondary DNS:
This section lets you congure settings for your local area network.
Select this connection if you have a DHCP server running on your network
and would like your camera to obtain an IP address automatically.
If you choose DHCP, you do not need to ll out the IP address settings.
You may obtain a static or xed IP address and other network information
from your network administrator for your camera. A static IP address may
simplify access to your camera in the future.
Enter the IP address that the camera will use on your network. You may
need to get this information from your ISP or network administrator.
Enter the subnet mask that your camera will use on the network. The
default value is “255.255.255.0.” This is used to determine if the destination
is part of the same subnet.
Enter the address of the router or gateway your camera will use on the
network. The gateway is used to forward frames to destinations in a
dierent subnet. Invalid gateway settings may cause transmissions to a
dierent subnet to fail.
Enter the primary domain name server that translates names to IP
addresses.
Enter the secondary domain name server used to back up the Primary
DNS.