User manual

DCS-2330L

ENGLISH

• Computer with Microsoft Windows

8/7/Vista/XP, or Mac with OS X 10.6 or higher

• PC with 1.3GHz or above and at least 128MB RAM

• Internet Explorer 7, Firefox 12, Safari 4, or Chrome 20 or higher version with Java installed and

enabled

• Existing 10/100 Ethernet-based network or 802.11g/n wireless network

SYSTEM REQUIREMENTS

PRODUCT SETUP

WINDOWS USER

Step 1:

Carefully remove the rubber seal on the back of the DCS-2330L, and use the included Ethernet

cable to connect the DCS-2330L to your network.

Step 2:

Connect the external power supply to a power outlet. Wait until the power LED turns green.

Step 3:

Insert the Installation CD into your CD-ROM drive. If the Setup Wizard does not automatically run, go

to Start > Run, and type in D:\autorun.exe (where D: represents the letter of your CD-ROM drive)

and click OK. When the Setup Wizard appears, click Set up your Cloud Camera and follow the on-

screen instructions.

Step 4:

After conguring your DCS-2330L, you can remove the Ethernet cable and carefully reinsert the

rubber seal.