User manual

41D-Link DCS-2210L User Manual
Section 4: Conguration
Event Setup
In a typical application, when motion is detected, the DCS-2210L sends images to a FTP server or via e-mail as notications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is
triggered, a specied action will be performed. You can congure the DCS-2210L to send snapshots or videos to your e-mail address or FTP site.
To start plotting an event, it is suggested to congure server and media columns rst so that the DCS-2210L will know what action shall be
performed when a trigger is activated.
Event
Condition
Action
Media
(what to send)
Server
(where to send)
ex.
Motion Detection,
Periodically, Digital
Input, System Reboot
ex.
Snapshot, Video Clips
ex.
E-mail, FTP