User manual
26D-Link DCS-2136L User Manual
Section 4: Conguration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to congure your
new D-Link Camera and connect the camera to the Internet. Note that this
wizard will not register your camera with mydlink.com.
Click Next to continue.
Select Automatic IP Address if you want your DHCP server (usually
enabled on your router) to assign the camera its IP settings. If you want
to manually assign the IP settings, select Static IP Address and enter the
following details:
Enter an IP address for your camera.
Enter the subnet mask of your network.
Enter the default gateway address. This is usually the IP
address of your router.
Enter the primary DNS server’s IP address. This is usually
the IP address of your router.
Enter the secondary DNS server’s IP address. This is
optional.
IP Address:
Subnet Mask:
Default
Gateway:
Primary DNS:
Secondary DNS:
If you are required to connect using PPPoE, select Enabled and enter the
Username and Password for your PPPoE connection. Only select this option
if your camera is directly connected to your broadband modem. If it is on
a network with a router or gateway, do not select this option.
Click Next to continue.