Specifications

38
Recommendations for setting video for the best
performance (continued):
I want to compromise between real-time and clear images
If you have a broadband network, set Fix quality to Good image quality, or
higher, instead of setting the Bit rate. Otherwise, fix the bit rate according to
your actual network speed and set the frame rate to 30. If the image quality is
low, select a lower frame rate above 15. If the image quality is still not improved,
select a lower bit rate.
Click the Image Settings button from the Configuration screen to access the
settings that affect how the video image appears.
From this screen you can fine tune the video image.
Image Brightness, Contrast, Saturation and Hue are all adjusted in the same
manner. For each video compensation you can set from among eleven levels
ranged from -5 to +5. The default setting is zero for each adjustment.
You may press
to fine-tune the image and see what affect the setting
will have on the image. When the image is acceptable, press
to store the
image settings, or to recall the original settings. If settings are changed
without saving, they will be used until the next system start-up.
Using the DCS-2100+ with an Internet browser
(continued)
Configuration > Advanced > Image Settings
Click Image Settings