D-Link DCS-2100+ Enhanced 2.4 GHz Wireless Internet Camera Manual Version 2.
Contents Contents of Package ............................................................................3 Introduction............................................................................................4 Features and Benefits ...........................................................................4 Connections ..........................................................................................6 Hardware Installation ..........................................................................
Package Contents ! ! ! ! ! ! ! D-Link DCS-2100+ Internet Camera Power Adapter Installation software and manual on CD Quick Installation Guide Camera Stand Category 5 Ethernet Cable 2 Antennas If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage than the one included with the DCS-2100+ will cause damage and void the warranty for this product. Minimum System Requirements: ! ! ! ! Internet Explorer 5.
Introduction The D-Link DCS-2100+ Wireless Internet Camera is a powerful surveillance system that connects wirelessly to an your 802.11b network. The DCS-2100+ features enhanced 802.11b and connects wirelessly at up to 22 Mbps (Megabits per second). The DCS-2100+ differs from a conventional PC Camera because the Internet Camera is a standalone system with a built-in CPU and Web server, providing a low-cost solution capable of solving demanding security and home/office monitoring needs.
Features & Benefits (continued) Web Configuration Using the Internet Explorer Web browser, administrators can configure and manage the Internet Camera directly from its own Web page via the Intranet or the Internet. Up to 20 user names and passwords are permitted, with privilege settings controlled by the administrator.
Connections Antenna Connectors Reset Button DC Power Connector Ethernet Cable Connector I/O Connector Antenna Two antennas are included with the DCS-2100+. These are screwed onto the antenna connectors on the back panel to provide a connection with a wireless network. Ethernet Cable Connector The Internet Camera’s back panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling.
Connections (continued) DC Power Connector The DC power input connector is located on the DCS-2100+ Internet Camera’s back panel and is labeled 12VDC with a single socket to supply power to the Internet Camera. I/O Connector The DCS-2100+ provides a terminal block with two pairs of connectors situated on the back panel. One pair is for input and the other is for output. The I/O connectors provide the physical interface to send and receive digital signals to a variety of external alarm devices.
Hardware Installation Connect to an Ethernet Network If you are connecting the DCS-2100+ to a wired Ethernet network, connect an Ethernet cable to the network cable connector located on the Internet Camera’s back panel and attach it to the network. If you are connecting the DCS-2100+ to a 802.11b wireless Ethernet network, attach the two wireless antennas to the antenna connectors on the back panel of the DCS-2100+.
Software Installation After you have successfully completed the hardware installation of the DCS-2100+ Internet Camera, it is necessary to install software to configure and operate the camera. The first step is to run the IP Installer program on the CD. IP Installer allows you to use the Internet Camera with your Internet browser. With the IP Installer program you can enter settings that permit the camera to access the Internet directly or through your Ethernet network.
Software Installation (continued) The opening IP Installer screen will appear and show a MAC address of the DCS-2100+ and an IP Address (which may or may not be correct depending on what you have your DCS-2100+ connected to.) If you have a DHCP* server on your network, there will be a valid IP Address displayed here. *A DHCP server is a device that supplies IP Addresses to its clients that are on the same network.
Software Installation (continued) If you have a DHCP server on your network, you will already have a valid IP Address in these fields. If you do not have a DHCP server on your network fill out your IP Address, Subnet mask, Gateway and at least one DNS IP Address. If you do not know what to put in these fields, please contact your System Administrator or your Internet Service Provider.
Software Installation (continued) If you need to make any changes, click Back to modify your camera settings. To accept the settings, click Restart. Click Restart Click OK and the DCS-2100+ Internet Camera will reboot to accept the settings. If the IP Installer has not made any modifications to the settings, it will warn you that the settings were accepted but no changes were made. You should now see the opening IP Installer screen with an IP address assigned to the MAC address of the DCS-2100+.
Installing IP Surveillance Software The IP Surveillance software on the CD included with the DCS-2100+ Internet Camera converts the DCS-2100+ into a powerful, yet flexible, surveillance system for home or business, with these features: ! ! ! ! ! ! ! ! ! ! ! ! ! ! Real-time Monitoring Video Recording to hard disk High quality video High video compression ratio Maximum of 16 cameras with different display layouts Smart playback Triggered event browsing Fast database searching Configurable automated alarms A
Installing IP Surveillance Software (continued) Click Yes Please read the Software Licensing Agreement and click Yes if you agree with the agreement. Click No to exit the installation. Click Next Enter your name and company information and click Next.
Installing IP Surveillance Software (continued) Select the destination directory. Click Next Select the program folder the software will be installed into.
Installing IP Surveillance Software (continued) Click Next Click Finish The installation is complete.
Testing the DCS-2100+ Internet Camera Open your Internet browser and type in the IP address of the DCS-2100+. In this example the address is: http://192.168.0.146 (your DCS-2100+ may have a different IP address based on what you used in the IP Installer program.) The window in the center of your browser is the camera image window. You should now see a video image and hear the audio over your computer speakers from the DCS-2100+. If you are having problems please consult the FAQ section of this manual.
Security At this point it is highly recommended that you click on the Configuration button on the Home screen, and then the Tools tab to bring you to the Admin screen. Enter a password for security purposes. To ensure the highest security and prevent unauthorized use of the Internet Camera, the Administrator has the exclusive privilege to access the System Administration settings to allow users entry and authorize privileges for all users.
Using & Configuring the DCS-2100+ with a NAT Router D-Link’s DCS-2100+ is a versatile and cost effective Internet Camera offering both video and audio monitoring. It can also serve as a powerful surveillance system in security applications. The DCS-2100+ can be used with any wired or 802.11b wireless router. This section explains how to view the camera from either the Internet or from inside your internal network.
Using & Configuring the DCS-2100+ with a NAT Router (continued) This is the IP Address assigned to your camera. Write it down for later use. 192.168.0.146 is only an example. You will probably have a different IP Address. Assign a Local IP Address with IP Installer # View the Internet Camera using your Internet Explorer Web browser Run your Internet Explorer Web browser. In the address bar, type in the IP Address that was assigned to the Internet Camera by the IP Installer program.
Using & Configuring the DCS-2100+ with a NAT Router (continued) These are the port settings for your camera. They can be changed if needed. Ports that are used by the DCS-2100+ Router Set-Up and Installation The following steps generally apply to any router that you have on your network. The D-Link DI-614+ is used as an example to clarify the configuration process. Configure the initial settings of the DI-614+ by following the steps outlined in the DI-614+ Quick Installation Guide.
Using & Configuring the DCS-2100+ with a NAT Router (continued) http://192.168.0.1 Your WAN IP Address will be listed here. Determine Your Router’s IP Address (WAN) Note: Because a dynamic WAN IP can change from time to time depending on your ISP, you may want to obtain a Static IP address from your ISP. A Static IP address is a fixed IP address that will not change over time and will be more convenient for you to use to access your camera from a remote location.
Using & Configuring the DCS-2100+ with a NAT Router (continued) Follow these steps to configure your router’s Virtual Server settings: • Click Enabled. • Select Both under Protocol Type (TCP and UDP) • Enter your camera’s local IP Address (e.g., 192.168.0.146 in the example in step # above) in the Private IP field. • If you are using the default camera port settings, enter 80 in to the Public and Private Port section, click Apply.
Viewing Your Camera After all the router settings have been entered correctly, a PC user inside or outside your network will have access to the camera through the Internet Explorer Web browser. To access the camera from the Internet, type the IP Address of the router given to you by your ISP, followed by a colon, and the port number that you gave your camera (e.g., http://205.163.122.96:83). It is not necessary to enter the colon and port number if you are using the default Web server port 80.
Using the DCS-2100+ with an Internet browser If you are following this manual in the order it is presented, you should now have an operating DCS-2100+ Internet Camera configured with the Installer program. You also have installed the IP Surveillance software from the CD. This section of the manual will deal with using the Internet Camera in two parts: ! Using the DCS-2100+ with an Internet browser and accessing the screens to control and monitor the camera.
Using the DCS-2100+ with an Internet browser (continued) Home Page Screen The image from the DCS-2100+ should be visible from the Home page on your computer monitor. There are two buttons on the left side of the Home page: Connection Type and Configuration. Click on the Connection Type button to change settings related to the connection.
Using the DCS-2100+ with an Internet browser (continued) Home > Connection Type Screen http://192.168.0.146 The following options are available from the Connection Type screen: Media Option: Allows a user to disable audio when viewing video. Protocol Option The UDP Protocol should be chosen for the most users. Generally, the client computer will automatically try these protocols in the following order, UDP -> TCP -> HTTP.
Using the DCS-2100+ with an Internet browser (continued) Home > Configuration Click Configuration There are 5 tabs across the top of the Configuration screen. From each tab, different elements of the DCS-2100+ can be configured. The Advanced tab is the default screen in Configuration and Network is the default screen under Advanced. Any changes made to these settings will require the system to restart to validate. Make sure every field is correctly typed before clicking on Apply.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Advanced > Network Reset IP Address at next boot Once the DCS-2100+ is configured, this box should be unchecked at all times. If the box has been checked and the connection is lost, either run IP Installer or PING the IP Address of the camera from a command prompt to regain the connection. General Settings IP address - Necessary for network identification. Subnet mask - Used to determine if the destination is in the same subnet.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Advanced >Network Settings (continued) Streaming Settings Control channel port - It can be set to other than the default port 5001 to correspond with the port opened by the firewall. Audio channel port - It can be set to other than the default port 5002 to correspond with the port opened by the firewall. Video channel port - It can be set to other than the default port 5003 to correspond with the port opened by the firewall.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Advanced >Network Settings (continued) Channel - The default wireless channel setting is channel 6. Select the channel that is the same as the other wireless devices on your network. TX Rate- Select the transmission rate on the network. 22 Mbps is the default setting. Preamble- Select Long or Short Preamble.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Advanced > Mail & FTP Click the Mail&FTP button from the Configuration screen to access video settings that control sending images via email and FTP. SMTP SMTP (mail) server 1 - The domain name or IP address of an external mail server. Recipient email address 1 - The email address of recipients for snapshots or a system log file.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Advanced > Mail & FTP (Continued) FTP Settings Local FTP server port - It can be other than default port 21. If you find that you want to change the port to a port number other than 21, you will need to specify the port when connecting to the FTP server. For example FTP://68.5.1.81:60 (if you are to use port 60 for your FTP server port) 1st FTP server - The domain name or IP address of the external FTP server.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Advanced > Mail & FTP (Continued) 2nd FTP server - The domain name or IP address of the external FTP server. 2nd FTP user name - Granted user name on the backup FTP server. 2nd FTP password - Granted password on the backup FTP server. 2nd FTP remote folder - Granted folder on the backup FTP server. Secondary FTP passive Mode - Passive mode setting for the backup FTP server.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Advanced > Video Click the Video button from the Configuration screen to access video settings that affect how the video image appears. Click Video Text on video - Text will be displayed in the black bar above the video window with the timestamp. The timestamp is captured from the date and time of the DCS-2100+ and is maintained by a built-in real-time clock. Color - Select the option for color or monochrome video display.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Advanced > Video (Continued) Power line frequency (for fluorescent light) Fluorescent lights may intermittently flash depending on the AC power line frequency. Change the frequency setting to eliminate a flashing image when the light source is fluorescent light. Maximum frame rate- Limits the maximum refresh frame rate.
Using the DCS-2100+ with an Internet browser (continued) Recommendations for setting video for the best performance: “Best performance” means the image refresh rate should be the fastest possible and the video quality should be the best possible at the lowest network bandwidth possible. Three factors, Maximum frame rate, Fix bit rate, and Fix quality in the Video Configuration page, are related to performance.
Using the DCS-2100+ with an Internet browser (continued) Recommendations for setting video for the best performance (continued): I want to compromise between real-time and clear images If you have a broadband network, set Fix quality to Good image quality, or higher, instead of setting the Bit rate. Otherwise, fix the bit rate according to your actual network speed and set the frame rate to 30. If the image quality is low, select a lower frame rate above 15.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Advanced > Motion Detection Click the Motion Detection button from the Configuration screen to access settings that affect how the DCS-2100+ Internet Camera can serve as a security device by recording only when motion is detected. http://192.168.0.146 Click Motion Detection Enable motion detection - Check this option to turn on the motion detection. Window Name - The text entered here will show at the top of the window.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Advanced >Motion Detection (continued) New - Click to add a new window. A maximum of three windows can be opened simultaneously. Use your mouse to drag the window frame to resize or the title bar to move. Clicking on the ‘x’ at the upper right corner of the window will close the window. Save - Saves the related settings of that window. To display motion detection, a graphic bar will rise or fall depending on the image variation.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Tools > Admin Click on the Tools tab to access 4 utility screens for controlling and administering the DCS-2100+. The default screen in Tools is the Admin screen. The DCS-2100+ is manufactured without any passwords by default. This allows the ability to access the DCS-2100+ (including the Configuration) by anyone as long as the IP address is known.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Tools > Admin (continued) Guest account: This option allows a user to connect to a camera with view-only privileges. User name is demo. No password is required. This is useful for demonstrations and keeps guests separate from users with accounts. Configuration > Tools > System Click on the System button to access the System settings from the Tools menu.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Tools > System Keep current date and time - Click to save the current date and time of DCS-2100+. An internal real-time clock maintains the date and time even when the power is off. Sync with computer time- Synchronize the date and time of DCS-2100+ with the local computer. The date and time of the PC is displayed and updated in the DCS-2100+. Manual Adjust the date and time according to what is entered by the administrator.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Tools > Applications Click on the Applications button to access the Applications settings from the Tools menu. http://192.168.0.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Tools > Applications (Continued) Weekly schedule: Sunday through Saturday - Select the weekdays that should perform the following operations: Snapshots begin at - Set the time to start operations. Setting the begin time the same as the stop time will force the operations to run continuously. Snapshots stop at - Sets the time to stop the operations.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Tools > Applications (Continued) Trigger action - There are four options for two actions regarding either trigger condition. They can have multiple selections. While choosing the trigger output alarm, the digital output will short both pins to connect the circuit of the attached external device; otherwise both pins will be open. While choosing to upload snapshots, the method can be either email or FTP.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Tools > Applications (Continued) FTP put snapshots with date and time suffix - If the suffix is added, the captured date and time can be easily differentiated from the snapshot file name in either sequential or event operation. For instance, “video@20020102030405.jpg” means the JPEG image was captured at 4 minutes and 5 seconds after 3 o’clock, January 2nd, A.D. 2002. If the suffix is omitted, the file named “video.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Status > Device Info Click on the Status tab to access Device Info and a Log of DCS-2100+ system activity. The Device Info is the default screen when you click on the Status tab. http://192.168.0.
Using the DCS-2100+ with an Internet browser (continued) Configuration > Status > Log Click on the Log button to access a system log of system activity from the Status menu. The content of the log file reveals useful information about the current configuration and connection logged after the DCS-2100+ boots up. Click Log Configuration > Help Click on the Help tab to access descriptions of the particular function you need help with.
Using IP Surveillance Software Upon completion of the installation of the IP Surveillance software, you can run the Monitor program (for monitoring and recording from the DCS-2100+) from the Windows folder: Start\ Program Files\D-Link\IP Surveillance\Monitor or the directory you specified during the installation. There is also a Playback program (for accessing and playing video captured in the Monitor program.) The Playback program is detailed starting on page 70.
Using IP Surveillance Software (continued) Control up to 16 DCS-2100+ Internet cameras from this screen.
Using IP Surveillance Software (continued) Monitor Program Main Screen: Misc. Functions Channel Area Image Layout Area Recording Settings Hard Disk Status Video Area Features Menu & Alert Messages DI/DO Control Descriptions of the sections of the Monitor program Main screen: ! ! ! ! Miscellaneous functions: Including quitting the application, snapshot, full screen monitoring, and the Function menu for setting Global Settings, Camera Configuration, and Backup of data.
Using IP Surveillance Software (continued) ! Recording settings You can record video onto your hard disk. The recording schedule is configured in the Scheduler. ! Hard disk status In this area, you can get the hard disk status. This informs you of the available disk space remaining. ! DI/DO control Receive the digital input signal and send digital output signal. ! Alert Message Display the last alert messages. Logging In You need to login to use the IP Surveillance software system.
Using IP Surveillance Software (continued) Configuring a DCS-2100+ in IP Surveillance When you first login, you should configure the DCS-2100+ from the Camera Configuration screen found in the Function menu. Once you set up the administrator privilege, you can access the Camera Configuration screen. A warning message will appear to warn you that any recording that is occurring will stop when you access Camera Configuration.
Using IP Surveillance Software (continued) Home > Camera Configuration Screen (continued) In the Local Settings there are four main functions: Insert – To add cameras to the camera list, specify the IP address and port, click the Insert button. The program will try to connect to the DCS-2100+. If the connection succeeds, the admin password of the remote DCS-2100+ camera is required. If you provide the correct password, the camera will be inserted in the list.
Using IP Surveillance Software (continued) Changing the Camera Order in the List You can drag and drop the gray area (fixed area) of the camera list grid to change the arrangement of cameras. This makes it easy to rearrange the cameras. Left-click in the gray area. Move the mouse to the location you want and release the mouse button. Here video 1 will be moved to the 10th row.
Using IP Surveillance Software (continued) Saving the Changes Once you click the Save button, the changes in the configuration will be saved and will validate immediately. Global Settings Click on the Global Settings item from the Function Menu. This area indicates backup status and last backup time Snapshot Directory – The directory for storing the snapshot data. Recording Directory – The directory for storing the recorded video data.
Using IP Surveillance Software (continued) Reserved space – Indicates how many bytes should be reserved on the hard disk. If the recording data exceeds disk capacity, the new video data will replace the oldest data (if Cycle Recording box is checked). This space can be adjusted with the sliding bar below it. Modulation Mode – For selecting the input signal format (NTSC for US use, or PAL that is used mostly in Europe).
Using IP Surveillance Software (continued) Check here to enable proxy. Set the proxy & port Check here to enable filter Enter IP address to add Add an IP address Delete an IP address Click OK If you enable proxy server and enable IP restriction, the listed IP addresses will not use the proxy. Connecting to the DCS-2100+ Once you connect to the DCS-2100+, you can drag and drop a camera into the video area to begin viewing video from the camera.
Using IP Surveillance Software (continued) Adding a Channel: Adding a new camera as a channel can be accomplished with a simple drag and drop procedure. After you have inserted the camera from the Camera Configuration screen in the Function Menu, the channel number (shown below) will change from grayed out to blue (see page 55 to Insert a camera): 1. Click on the number of the camera that was inserted previously: 2. Hold the mouse button down and drag the channel number onto a droppable video area.
Using IP Surveillance Software (continued) Stop Monitoring a Channel: To stop monitoring a video channel, you can drag and drop the video (in the video area) to the trash can. To delete a channel: 1. Select the video display of the channel to be discarded. 2. Move the mouse cursor to the channel number. 3. Press and hold the left mouse button, the cursor will change if the cursor is located in a droppable area. 4. Drag the cursor to the trash can and release the mouse button to delete the channel.
Using IP Surveillance Software (continued) The Layout There are six layouts in the monitor tool. You can select (by left-clicking on the icon) which videos you want to monitor. In each layout, you can drag and drop the “channel number” to any video box in the video area. If all conditions are okay, then the video will appear in the video box, and the old video is replaced.
Using IP Surveillance Software (continued) Record & Schedule Record – Record the selected channel manually. Stop – Stop recording the selected channel manually. Scheduling – Arrange recording schedule Enable Scheduler – Record according to the scheduler settings. DI/DO Control Only one user with the administrator privilege can access the DI/DO control at the same time. Refer to the following figure to control.
Using IP Surveillance Software (continued) If you turn on the Alert function, and a trigger is set off by motion, an alert message will show in this window. The message format is described as follows: “time”=>”alert type” #”channel number”(“win1”,”win2",”win3") For example, the message “03:47:25 PM=>MO #5(0,1,1)” means that a motion detection alert occurred at 03:47:25 PM in motion window 2 and in motion window 3.
Using IP Surveillance Software (continued) Miscellaneous Functions Quit – Closes the application and saves last settings. Full Screen – Switch to full screen video, double click the screen to return to the previous view. Local Time – Displays the current time. Snapshot – Takes a snapshot from the selected video and saves it as a bitmap file. You can set the directory in Global Settings. Stop Alert Sound – Whenever an alert occurs, the alert sound will start to play.
Using IP Surveillance Software (continued) The layout of the scheduler tool is divided into 9 sections. For ease of use, you may skip to section 7. In section 7, when you input the date, hour and minute, the times you have selected will appear in the Hour, Day, Week and Month time-lines (sections 1,2,3 and 4 illustrated here.) Section 1 of the scheduler tool is the Hour time-line. When you input the hour in section 7 it will be illustrated in section 1.
Using IP Surveillance Software (continued) Current Year Settings And Camera Selector for the Recording function By default, the scheduler is running with the current date selected on the time-lines and Date-time picker. Therefore, the current scheduling year is the year that you run the scheduler tool. To change the year setting: Use the up (increase) and down (decrease) arrows to adjust the year setting. 2003 The Date-time selector in Section 7 (see above) will change the year concurrently.
Using IP Surveillance Software (continued) If users have configured the IP Surveillance software and the DCS-2100+ camera, the IP address and location will show the correct setting. Please note that when users switch between cameras, the changing of the schedule will be saved automatically. The Schedule-Record-File operations There are six related buttons.
Using IP Surveillance Software (continued) Schedule with Time Picker Remember to make the Begin Time earlier than the End Time. Otherwise the Add action will be ignored. Select period Once Every Hour Every Day Every Week After you have made your Begin Time and End Time selections, select a period. You may want to record only Once, or you may want to record Every hour, Every day, Every week or Every Month.
Using IP Surveillance Software (continued) Playback Program The Playback program is a powerful tool to assist you in browsing the recorded video database. It has two display modes (Normal display mode, Preview Mode) and three playback methods (Full Range, Time Period, Events Preview).
Using IP Surveillance Software (continued) Playback Program (continued) Installation of the IP Surveillance software is detailed in an earlier section of this manual titled Installation of IP Surveillance Software under the main section titled Software Installation. Logging-in Before you start the Playback software program, it is necessary to login. For security reasons, only the administrator account can login to Playback.
Using IP Surveillance Software (continued) Playback Program (continued) Display Area The display area shows the surveillance database of each camera by events triggered by an alert or by time. You can change the video size through the Display Adjustment Tool, and the playback method through the Play Control Tool. Under the normal display mode you can double click on the frame area to change the frame size to a 1:1 or 2.25:1 ratio.
Using IP Surveillance Software (continued) Playback Program (continued) Frame Selection Indicator The frame selection indicator only appears when you change the display mode to Preview Mode. It appears as a red rectangle surrounding one of the nine Event Preview Frames. Once you select one of these frames, you can control its play status through the jog dial in the control area. Pull Bar The Pull Bar is a fast, flexible control for seeking data in the selected time period.
Using IP Surveillance Software (continued) Playback Program (continued) Database path The most important item in the settings dialog is the database path setting. You must set it to the directory that contains the surveillance database to make the program work properly. AVI file location It sets the storing directory when you export AVI files. The exported AVI files will be stored in the sub-directory under the directory you set here with the name of the location you select.
Using IP Surveillance Software (continued) Playback Program (continued) Control panel position With this setting you can place the Control panel on either the left or the right of the screen. Once you change the setting of modulation or Control panel position, you have to restart the program to for these changes to take effect. If you set the database path correctly, the video sequence will start displaying in the normal display mode when you click on the OK button.
Using IP Surveillance Software (continued) Playback Program (continued) This color-inverted region will be the new time period the program is going to display. If you change your mind and don’t want to see that period, you can cancel it by just pressing the right button of your mouse with the left button still pressed. If you click on the left button without dragging it, the action will be the same as clicking on the Pull Bar in the same x-axis position.
Using IP Surveillance Software (continued) Playback Program (continued) Histogram Area The Histogram Area in the Preview Mode displays events that occurred previously as red bars, which represent the time and value of the event. Currently displayed events are represented by green bars and the selected event with blue bars. If you want to access the histogram area, you must change the Area Selection Indicator to the Histogram Area.
Using IP Surveillance Software (continued) Playback Program (continued) Period Selector Period selector provides a precise way to choose the start time and the end time of a new period. The end time must be later than the start time. After you give the correct start and end time, clicking on the Play button in the jog dial will play the new period in the Display Area. If you change the period start and end time label, the Pull Bar and Histogram Area will change, too.
Using IP Surveillance Software (continued) Playback Program (continued) Since the program will record the previous start and end time in Time Period and Events Preview mode. Any time you want to change the period selector to see another period, you must change the Playback Method Selector to the mode you want to use first. Otherwise, the Period Selector will revert back to the previous data used in Playback Method Selector.
Using IP Surveillance Software (continued) Playback Program (continued) Stop When you want to stop the displaying video sequence, you can click on the Stop button. Once you have pressed the Stop button, the start point will be reset to the start of the present period. Pause The Pause button provides you a way to pause the displaying video sequence. When the displaying video is paused, clicking on the Pause button again will continue the video to display.
Using IP Surveillance Software (continued) Playback Program (continued) Zoom Out When you click on the Zoom Out button one time, the image size in the display area will be reduced 12.5 percent to the original size. To show the location and time information completely, the minimum zoom out ratio is limited in 0.5:1. Full Screen When you click on the Full Screen button, the video sequence will be enlarged to fill the whole screen. You can double click on any place to return to the original state.
Using IP Surveillance Software (continued) Playback Program (continued) Zoom Out Each time you click on the Zoom Out button in the searching range adjustment toolbox, the displayed time period will be double in the center of the original time period unless the start time or end time exceed the database boundary. The scale of pull bar and alert histogram window changes and the period start and end time change, too. The period selector will show the new start and end time.
Using IP Surveillance Software (continued) Playback Program (continued) The time required to Export data depends on the speed of the computer and processor that you are using. At any time during the export, you can click on the Stop button in the jog dial to stop the procedure. Then you will get an AVI file from the start time to the time you clicked the Stop button. The exported AVI filename will be generated automatically and will be listed in the fourth column of the status area.
Using IP Surveillance Software (continued) Playback Program (continued) System Control Toolbox The System Control Toolbox provides basic operations for the playback program. The three elements of the system control toolbox:. Lock Window, Settings, and Quit. Lock Window To protect your computer while left unattended you can click on the Lock Window button to lock the main window. Once you click this button, the main window will be hidden and the login dialog will appear.
Firmware Upgrades The DCS-2100+ Internet Camera supports firmware upgrades (the software that controls the operation in the DCS-2100+). D-Link will supply the latest firmware version on the D-Link support Web site at: support.dlink.com. To upgrade the firmware: Download the latest firmware file from D-Link. Click on the file Upgrade Wizard located on the CD enclosed with the DCS-2100+. Power on the DCS-2100+ and connect it to the Ethernet port of your computer.
Firmware Upgrades (continued) If the Upgrade Wizard finds the Internet Camera the following screen asks for the file name or gives you the choice to browse for the file. The file name should be FLASH.BIN for the DCS-2100+ Internet Camera. Click Next The firmware file is scanned by the Upgrade Wizard and the version is reported to you. Click Yes After clicking Yes the upgrade begins.
Firmware Upgrades (continued) Click Exit Warning The download firmware procedure cannot be interrupted. If the power or network connections are broken during the download procedure it might possibly cause serious damage to the Internet Camera.
Appendix Frequently Asked Questions Internet Camera Features Q: What is an Internet Camera? A: The Internet Camera is a standalone system connecting directly to an Ethernet or Fast Ethernet network. It differs from a conventional PC Camera, the Internet Camera is an all-in-one system with built-in CPU and Web-based solutions providing a low cost solution that can transmit high quality video images for monitoring.
Frequently Asked Questions (continued) Q: Can the Internet Camera be setup as a PC-cam on a computer? A: No, the DCS-2100+ Internet Camera is used only on an wireless 802.11b, Ethernet or Fast Ethernet network. The D-Link DSB-C110, DSB-C310 can be used as a PC Camera (Webcam). Q: Can the DCS-2100+ be connected on the network if it consists of only private IP addresses? A: The Internet Camera can be connected to a LAN with private IP addresses.
Frequently Asked Questions (continued) Q: I connected the Internet Camera directly to a computer with a crossover cable Ethernet cable and received the following Windows error upon running IP Installer: A1: This Windows error will occur if the Internet Camera is connected to a computer that is not properly configured with a valid IP address. Turn off DHCP from the Network Settings in Windows and configure the computer with a valid IP address or connect the camera to a router with DHCP enabled.
Frequently Asked Questions (continued) Q: The images appear to be of poor quality, how can I improve the image quality? A1: Make sure that your computer’s display properties are set above 256 colors. Using 16 or 256 colors on your computer will produce dithering artifacts in the image, making the image appear to be of poor quality. A2: The configuration on the Internet Camera image display is incorrect.
Reset and Restore There is a button hidden in the pinhole beside the Ethernet socket. It is used to reset the system or restore the factory default settings. Sometimes resetting the DCS-2100+ will return the system back to a normal state. If the system still has problems after reset, restore the factory settings and install again: RESET: 1. Lightly insert a paper clip (or a similar sized tool) into the reset hole on the back of the camera, press lightly and then release the button. 2.
I/O Connector I/O Connector Definition for the Internet Camera The DCS-2100+ provides a general I/O terminal block with one digital input and one relay switch for device control. Pin 1 and pin 2 can be connected to an external sensor and the state of voltage will be monitored from the initial state ‘LOW’. The relay switch of pin 3 and pin 4 can be used to turn on or off the external device.
Adjusting the Camera Focus The DCS-2100+ Internet Camera features an interchangeable C/CS-type lens that can be used for different applications as necessary. It supports rotational focus control so the lens can be adjusted to focus under normal and stable conditions to maximize the image quality of the Internet Camera.
Replacing the Lens Since the DCS-2100+ Internet Camera is designed with a CS-mount, the lens equipped with the Internet Camera can be replaced with any standard C or CSmount lens commonly used within the surveillance industry. Follow the instructions below to replace the supplied lens with any C or CSmount lens. 1. Unscrew the Internet Camera lens 2. When using a C-mount lens, attach the new lens to a CS to C-mount adapter. 3. Screw the new lens onto the Internet Camera. 4.
Technical Specifications Remote management Camera configuration and Camera system log can be accessed remotely via Internet Explorer 5.x or above Web browser. Networking Protocol TCP/IP, HTTP, SMTP, FTP, NTP, DNS and DHCP Ethernet Enhanced 802.11b wireless or 10BaseT or 100BaseT Fast Ethernet auto-negotiation WLAN 2.4Hhz 802.11b+ DSSS CSMA/CA Protocol Bit rate: 22/11/5.5/2/1 Mbps Security: Up to 256-bit WEP Antenna 2.4Ghz swivel type, monopole Frequency 2.4Ghz-2.
Technical Specifications (continued) LED indicator Bi-color status indicator Camera specification 1/3 inch color CMOS sensor 2.5Lux/F1.4 AGC/AWB Electronic shutter: 1/60 ~ 1/15000 second Standard CS mount type lens, 6mm, F1.8 Power 12VDC 1.5A, external power supply Weight 328 grams Dimension 160mm(L) x 83.5mm(W) x 54mm(H) Viewing system requirement Protocol Standard TCP/IP Internet Suite ActiveX Operating system Microsoft Windows XP, 2000, ME or 98SE Browser Internet Explorer 5.
Contacting Technical Support Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone.
Time Zone Table GMT stands for Greenwich Mean Time, which is the global time that all time zones are measured from.
Time Zone Table (continued) 100
Warranty and Registration USA only Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: • • D-Link or its authorized reseller or distributor and Products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO.
Warranty and Registration USA only (continued) • After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the Product and will not ship back any accessories.
Warranty and Registration USA only (continued) Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. Copyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc.
