User's Manual
25D-Link DCS-1100/1130 User Manual
Section 4 - Conguration
The options in Image Setup allow you to adjust the settings for your IP camera
sensor and image.
Brightness: This adjusts the brightness of the camera image. This is set to 60 by
default.
Saturation: This adjusts the color saturation of the camera image. This is set to
60 by default.
Contrast: This adjusts the contrast of the camera image. This is set to 0 by default.
Frequency: This option adjusts the camera sensor’s setting to avoid the image
ickering under certain light sources, such as orescent lights. This is set to Auto
by default.
White balance: You can change the white balance of the camera image by
selecting a setting from the dropdown box. This is set to 60Hz by default.
B/W: Ticking this checkbox will change the camera image into black and white.
Flip: This will ip the image vertically.
Mirror: This will ip the image horizontally in such a way that your left side will
be on the left side of the screen and vice versa.
Note: Mirror and Flip can be used if you choose to mount the DCS-1100/1130 upside down on the ceiling.
Setup > Image Setup