User manual

31D-Link DCS-1110 User Manual
Section 3 - Configuration
The current camera time.
The current camera date.
Enter the IP address or domain name of
the time server. Leaving the box blank
will connect the camera to default time
servers. This is optional. Press Set Time
to set the time to the NTP server.
Synchronize the date and time of the
camera with the local computer. Press
Set Time to update the camera time with
the PC’s time.
Manually set the time by selecting the
Year, Month, Day, Hour, Minute, and
Second.
Used to adjust the hour of time servers
for local settings.
Used to adjust for Daylight Saving Time
if applicable in your region.
Time:
Date:
Default NTP
Server:
Synchronize with
computer time:
Set the Time:
Time Zone:
Daylight Saving
Time:
System