User manual

24D-Link DCS-1110 User Manual
Section 3 - Configuration
Select the viewing video quality. By
default the quality is set to High.
This is the size of the video display. By
default the capture resolution is set to
VGA (640x480).
This is the size of the video display. By
default the capture resolution is set to
VGA (640x480).
This is the refresh frame rate. By default
the frame rate is set to 15 frames per
second (fps).
The higher the bit-rate the better the
picture quality, but at the same time the
file size will also be larger. For a low
bandwidth network, a lower bit rate than
352k is advised.
This name will appear on the log-in screen.
Quality:
Capture
Resolution:
Default Level
Custom Level
Capture
Resolution:
Advanced
Video
Frame Rate:
Bit Rate:
Camera
Name: