User manual

22D-Link DCS-1110 User Manual
Section 3 - Configuration
This page is used to set up the DCS-1110
using the Wizard to walk you through
setting up the camera for your network.
This will allow you to change the
configuration settings of the DCS-1110.
This will turn on the built-in microphone
on the DCS-1110. By default the audio is
turned off.
This will flip the image vertically. This
feature can be used if you choose to
mount the DCS-1110 upside down on
the ceiling.
Sets the measurable difference between
two sequential images that would indicate
motion. This will allow you to change the
configuration settings.
Click to capture a snapshot image. The
image will pop up in a new window.
This image can be saved to a local hard
drive.
Wizard:
Setup:
Audio On:
Upside Down:
Mirriored:
Snapahot:
Home