Specifications

44D-Link DCS-1100/1130 User Manual
Appendix A - Installing the DCS-1100/1130 on a Router Without UPnP
2) Assign an IP Address and Port for Your Camera
• ClickontheSETUP tab, and select Network Setup
AlocalIPaddressisrequiredtocongureyourcameraandtoviewyour
camera within your local network. You may use the default camera IP
address of 192.168.0.20. If you wish to use a different IP address, be
sure that the camera settings correspond to your network settings. The
Default GatewaywillbetheIPaddressofyourrouter’slocalIPaddress
(e.g.192.168.0.1, if you are using a D-Link router).