Specifications
43D-Link DCS-1100/1130 User Manual
Appendix A - Installing the DCS-1100/1130 on a Router Without UPnP
Appendix A: Installing the DCS-1100/1130 on a
Router Without UPnP
If you connect your camera to an Internet router that does not support
UPnP, you can assign your camera to a DMZ connection on your router.
Formoredetails,refertoyourrouter’sUserManualformoredetailson
conguringyourcameratouseaDMZconnection.
If you have multiple cameras you wish to connect, or if you do not want
to use DMZ, follow these steps to allow multiple remote access to your
cameras:
1) Identify your camera on the network
2) Assign a local IP address and port for your camera
3) Determine your router’s WAN IP Address (Enable Remote
Viewing)
4)Openvirtualserverportsforyourrouter(EnableRemoteViewing)
1) Identify Your Camera on the Network
• Logintoyourcamera’swebinterfacefromacomputeronthesame
local (home) network
• Click on the MAINTENANCE tab, and select Device
Management
• EnterauniqueCamera Name for your camera
Note:Givingyourcameraauniquenameisimportantwhensetting
up multiple cameras on your network.