Specifications

31D-Link DCS-1100/1130 User Manual
Section 4 - Configuration
Here, you can set the camera to take snapshots when motion is detected.
Snapshots can be sent to an e-mail address and/or to an FTP server.
Enable Snapshot: Check this box to enable the snapshot feature.
Event Based (Motion Detection): This will set the camera to take a
snapshot whenever motion is detected.
Continuous (FTP only): This will set the camera to take snapshots
continuouslyatintervalsspeciedinFTP Server > Interval below. You
can only save to an FTP server when taking continuous snapshots.
Scheduled (FTP only): This will set the camera to take snapshots
continuously at intervals specied in FTP Server > Interval below
according to schedule you dene by checking days and entering the
times you want to record between. You can only save to an FTP server
when taking scheduled snapshots.
Setup > Snapshot