Specifications

26D-Link DCS-1100/1130 User Manual
Section 4 - Configuration
Note:VideoProle3isalwayssettoMJPEGastheEncodeTypeto
ensurethatatleastoneoftheVideoProlesareviewablebynon-IE
browsers.VideoProle4isformobiledevicesonly,andalwaysuses
MPEG-4astheEncodeType.
Enable Night Mode: Check this box to enable Night Mode. Night mode
allows the camera to use a longer shutter speed when the camera is in a
low-lightenvironment.Ifthecameraisinanareawherethereissufcient
lighting, Night Mode will not affect the video stream.
Shutter: This sets the longest shutter speed Night Mode will use when
Night Mode is enabled and the camera is viewing a low-light scene.
Light Source: Here you can set the kind of lighting used in the area your
cameraismonitoringtoimprovetheimagequalityofthevideo.
Enable Microphone: Checking this box will enable you to listen to audio
pickedupbythecamera’smicrophone.Thiswillallowyoutohearwhat
is happening near your camera.
Volume: This sets the volume level of the incoming audio.
Note: Higher frame size, frame rate and bit rates will give you better video
quality,buttheywillalsorequiremorenetworkbandwidth.Forbestviewing
results on a mobile phone, we suggest setting the frame rate to 5 fps and
bit rate to 20 Kbps.
After making any changes, click the Save Settings button to save
your changes, or click the Don’t Save Settings button to discard your
changes.