Installation Guide

5
You must change the Admin ID and Pass-
word immediately to protect your camera
against unauthorized access. By default,
the Admin ID and Password are blank. To
change the Admin ID and Password, select
both Change boxes and enter in a new
Admin ID and Password.
This screen appears if the default IP
Address of the camera (192.168.0.20) does
not correspond with your local area network
settings. You must assign an IP address
for your camera that corresponds to your
network’s IP addressing scheme.
By default, the Admin ID and Password are
blank. If you are running this Setup Wizard
for the first time, simply click OK to con-
tinue.
The IP Address of your camera must
corresond with your network settings for you
to access the camera. If you are unsure of
what these settings should be, please
check with your network administrator.
Click OK
Click OK
Click Yes
Click Next
Running the Setup Wizard (continued)
169.254.60.196