Quick Start Guide

DCH-S161
Wi-Fi Water Sensor
Quick Start Guide
Version 1.01 (US)_70x110
October 16, 2018
Copyright ©2018 All rights reserved. D-Link and the D-Link logo are registered
trademarks of D-Link Corporation or its subsidiaries. Product specifications,
size and shape are subject to change without notice, and actual product
appearance may differ from that depicted on the packaging. Visit dlink.com
for more details.
Support
For additional support resources and frequently asked
questions, visit:
support.dlink.com (USA) or support.dlink.ca (CAN)
For technical support, call:
1-877-453-5465 (USA) or 1-800-361-5265 (CAN)
Device Information
DCH-S161
Action Button / LED
Reset Button
The device is booting up or has been reset successfully.
The device successfully connected to a Wi-Fi network.
The LED will turn off shortly after.
?
Frequently Asked Questions
1) What can I do if my water sensor is not working
properly or I’m having problems setting it up?
Reset the water sensor by pressing the Reset button using a
paperclip and try setting the water sensor up again.
In addition, please verify that:
• your Internet connection is working.
• your router’s wireless is turned on.
• the AA batteries are inserted correctly and have power.
• your water sensor is on the same network as your
mobile device (for initial setup).
2) How do I turn o the siren?
Press the Action Button once to turn off the siren. When
next time the water sensor detects flooding, the siren will
sound again.
Minimum Requirements
To install this product, you will need:
• A 802.11n/g router (a router with a WPS button is
recommended)
• An Internet connection
• An e-mail account (required to register for mydlink
service)
• The mydlink™ app is available for iPhone®, iPad® and
Android™ devices. Please refer to the mobile app's store
page to check whether your device is compatible.
Ready for setup.
The device lost its Wi-Fi connection.
The device is connecting to a Wi-Fi network.