User manual
24D-Link DCH-M225 User Manual
Section 3 - Conguration
Wi-Fi Settings
This is set to Repeater mode and cannot be changed.
Click Scan to use Site Survey to scan for available wireless
networks within range of your DCH-M225. Select the
network you want to use the DCH-M225 to extend. You
can also type in the name (SSID) of the wireless network.
The SSID is case-sensitive and must be entered exactly the
same as your router or access point.
Select the security method that is being used by the wireless
network that you have selected: WEP, WPA-Personal, or
None. (For more information, refer to “Wireless Security
Options” on page 54.)
If you select WEP or WPA-Personal, you will be required to
enter the password or security key for the network you are
attempting to join.
Click Save to save the settings and return to the Home page.
Wireless Mode:
Wi-Fi Network
Name (SSID):
Security Mode:
Password:
Save:
This page lets you congure the Wi-Fi Network you would like your DCH-M225 to connect to. Use Site Survey to scan available
Wi-Fi networks so you can select the one you would like to extend. To access this page from the Home page, click on the Settings
drop-down menu at the top of the page and select Wi-Fi.
Note: You can also use WPS to connect your wireless devices to the DCH-M225’s extended network. For more information refer to “Connecting
to Wireless Clients Using WPS” on page 36.