Systems Network Router User Manual

D-Link Product Guide 2008
8
WIRED
ETHERNET
D-Link Product Guide 2008
9
● SNMP/Web-Based Standards
● 10/100BASE-TX Ethernet & RS-232
Console Ports
● Real-Time Display of Link, Speed,
Duplex Status of Media Converters
● Menu-Driven Terminal Program for
Management via Console Port or
Telnet
● Built-in SNMP Agent
● Supported Traps: Cold start, Warm
Start, Authentication Fail, Power Fail,
Fan Fail, Module Insertion, Module
Pullout, Port Link Down, Port Link Up
● Factory Reset & Remote Software
Reboot
● Remote Setting of Configurations
of Smart Media Converters (LLCF
Enable, LLR Enable, Port Enable,
Auto-Negotiation Enable)
● Configuration Setting Upload/
Download Through TFTP/Web
● TFTP/Web-Based Firmware Upgrade

Twisted-Pair to Fiber Gigabit
WDM Media Converter

Management Module
● Converts 1000BASE-T Gigabit
Twisted-Pair to 1000BASE-LX Gigabit
Fiber Signals
● Uses in Pair With DMC-1910T or
Equivalent Device
● Up to 15 km Single-Mode Fiber Cable
Length

● 16 Bays to House Up to 16 Media
Converters
● Standard 19-Inch Rack-Mountable
● Hot Swapping of Media Converters
● Hot Swappable Redundant Power
Supply
● Power Redundancy & Power Isolation
● 1 Universal Internal AC to DC Power
Supply Provided
● Second AC to DC Power Supply for
Load-Sharing Purposes (Optional)
● Media Converter Power Isolation for
Electrical Isolation From Each Bay
Media Converter Chassis

Twisted-Pair to Fiber Gigabit
WDM Media Converter
● Converts 1000BASE-T Gigabit
Twisted-Pair to 1000BASE-LX Gigabit
Fiber Signals
● Uses in Pair With DMC-1910R or
Equivalent Device
● Up to 15 km Single-Mode Fiber Cable
Length

Redundant Power Supply
● 90 to 260 VAC/47 to 63 Hz Auto-
Switching Input Power
● Power Overload Protection
● Load Sharing Support When 2 of This
RPS Installed in DMC-1000 Chassis
The stand-alone media converters are stand-alone devices that plug directly to the
network switches, installed independently of any media converter chassis. They are
cost-effective devices that convert twisted-pair Ethernet cable signals to fiber Ethernet
cable signals.



Twisted-Pair to Fiber Ethernet
Media Converter
● Converts 10/100BASE-TX to
100BASE-FX Signals
● Extends Network Distance Up to 2 km
on Multi-Mode Fiber Cable
Media Converter
Sensitivity
Media Type
Conversion
Max. Cable
Length
Network
Speed
Fiber
Connector
Wave
Length
Min. Tx Power
(Launch Power)
Max. Tx Power
(Launch Power)
Power
Budget
2 km 100Mbps MT-RJ 1300 nm -23.5 dB -14 dB -31 dB 7.5 V
Copper to
Multi-Mode Fiber
DMC-300M
2 km 100Mbps
SC
1300 nm -23.5 dB -14 dB -31 dB 7.5 V
Copper to
Multi-Mode Fiber
DMC-300SC
15 km
100Mbps
SC 1310 nm -20 dB 0 dB -32 dB 12 V
Copper to
Single-Mode Fiber
DMC-515SC
30 km
100Mbps
SC 1310 nm -15 dB -8 dB -34 dB 19 V
Copper to
Single-Mode Fiber
DMC-530SC
60 km
100Mbps
SC
1310 nm -5 dB 0 dB -35 dB 30 V
Copper to
Single-Mode Fiber
DMC-560SC
15 km 100Mbps
SC
1310 nm -15 dB -8 dB -31 dB 16 V
Multi-Mode to
Single-Mode Fiber
DMC-615SC
550 m
1Gbps SC
850 nm -9. 5 dB
-4 dB
-12.5dB
3 V
Copper to
Multi-Mode Fiber
DMC-700SC
1Gbps
SFP Slot
-- - - - -
Copper t o
Fiber
DMC-805G
10 km
1Gbps
SC
1300 nm -9.5 dB -3 dB -14.4 dB 4.9 V
Copper to
Single-Mode Fiber
DMC-810SC
20 km
100Mbps
SC
Tx: 1310 nm
Rx: 1550 nm
-15 dB -7 dB -32 dB 17 V
Copper to
Single-Mode Fiber
DMC-920R
20 km
100Mbps
SC
Tx: 1550 nm
Rx: 1310 nm
-18 dB -7 dB -32 dB
14 V
Copper to
Single-Mode Fiber
DMC-920T
30 km
100Mbps
SC 1310 nm -15 dB
-8 dB
-34 dB 19 V
Copper to
Single-Mode Fiber
DMC-1530SC
80 km
100Mbps
SC 1550 nm -5 dB
0 dB
-35 dB 30 V
Copper to
Single-Mode Fiber
DMC-1580SC
15 km
1Gbps
LC
Tx: 1310 nm
Rx: 1550 nm
-9 dB -3 dB
-21 dB 12 V
Copper to
Single-Mode Fiber
DMC-1910R
15 km
1Gbps
LC
Tx: 1550 nm
Rx: 1310 nm
-9 dB -3 dB -21 dB 12 V
Copper to
Single-Mode Fiber
DMC-1910T
Copper to
Multi-Mode Fiber
2 km
100Mbps SC
1310 nm -19 dB -14 dB
-34 dB 5 V
DFE-855
Media Converters