User Manual

Chapter 3 Hardware Installation Page 14
Chapter 3 Hardware Installation
The DAP-3760 / DAP-3860 Wireless Bridge is shipped with mounting hardware that
accommodates tower or mast installations. This chapter demonstrates the hardware
installation procedures, which include Assemble the Hardware Mounting, Pole Mounting,
Connect Up, Ground the Wire, Power On and Align the Antennas.
Assemble the Mounting Bracket
1. Assemble the main bracket by placing articulation pole to the T-form bracket via a
M8×110 screw through the insertion axe and fix with the M8 washer, spring washer and
M8 nut;
2. Place the main bracket into the seating and use a spanner to fasten the bracket to CPE
main unit with M5×12 screws and M5 washers provided in hardware packets;