User Manual

Chapter 4 Configuration Page 25
IP Address
Enter the settings obtained from your system administrator. The most important setting is IP
Address. You may manually assign an IP address or check “
DHCP” to automatically obtain
one from DHCP server on your network.
Do not change the IP address of the bridge while you are configuring with
Web-based management interface, otherwise you will disassociate from it! If
this occurs, login again with that new IP address; if DHCP is enabled then,
login again by entering bridge’s wireless device name in the IP address field.
Operating Mode
Four operating modes are available in this bridge: Base Station, CPE, Peer to Peer (CSMA)
and Peer to Peer (TDMA). Open “Radio” in “Wireless” and select the mode suitable for your
application.
Base Station
Under this mode, the bridge connects directly to the main Ethernet LAN and receives
connectivity from other CPE bridges.
Note: