User Manual

Chapter 3 Hardware Installation Page 18
Connect Up
Before installing the Ethernet cable with a waterproof RJ-45 connector, it is recommended that
the Cat-5 RJ-45 coaxial cable be used for the DAP-3760 / DAP-3860 to power injector
connections.
1. To connect to the hole labeled PoE+Data, open the black cover in advance by using a
coin or a slotted screwdriver and then screw in the body of the gland and tighten.
Connect Up – Step 1
2. Slide the sealing nut to the RJ-45 cable from its middle breach and then insert the sealing
into the cable.
Connect Up – Step 2
Insert the RJ-45 connector and make sure that the locking tab snaps home.
Connect Up – Step 3
Slide the Sealing Nut from its Breach
RJ-45 Port