Specifications

/ DAP-X2850
General
Device Interfaces 1 x RJ45 console port, 1 x 2.5 Gbps Ethernet
LAN (PoE), 1 x 10/100/1000 Mbps Ethernet
LAN, factory reset, power input
LEDs
Power/Status
Antennas 4 x internal
Antenna Gain 3.5 dBi (2.4 GHz), 5.5 dBi (5 GHz)
Data Signal Rate
1
2.4 GHz - Up to 1147 Mbps (1024QAM)
5 GHz - Up to 2402 Mbps (1024QAM)
Functionality
Standards IEEE 802.11a/b/g/n/ac/ax, IEEE 802.3u/ab, IEEE 802.3az
Energy-Efficient Ethernet (EEE), IEEE 802.3at PoE
Operating Frequency 2.4 - 2.483 GHz, 5.15 - 5.35 GHz, 5.47 - 5.85 GHz
Security Protocol WPA/WPA2/WPA3™ Personal/Enterprise, WEP
64/128-bit, SSID broadcast disable, MAC
address access control, internal RADIUS server
Software
Network Management Telnet, SSH, Web (HTTP), Secure Socket Layer
(SSL), Traffic control, D-Link Nuclias Connect
Physical
Power Supply Connect 12 V / 2.5 A (optional power
adapter not included), IEEE 802.3at PoE
Max. Power Consumption 19.44 W
MTBF > 30,000 hours
Operating Temperature 0
˚C to 40 ˚C
Storage Temperature -20 ˚C to 65 ˚C
Operating Humidity 10% to 90%
Storage Humidity 5% to 95%
Weight 763.8 g
Dimensions 212.4 x 212.4 x 46.7 mm
Certifications CE, FCC
Power/Status
LAN
Reset
Button
Power
Connector
LAN
(PoE)
Console
1
Maximum wireless signal rate derived from IEEE standard 802.11 and 802.11ax specifications. Actual data
throughput will vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may
adversely affect wireless signal range.