Datasheet

DAP-2620 Wireless AC1200 Wave 2 In-Wall PoE Access Point
D-Link European Headquarters. D-Link (Europe) Ltd., First Floor, Artemis Building, Odyssey Business Park, West End Road, South Ruislip HA4 6QE, United Kingdom.
Specications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners. ©2019 D-Link Corporation. All rights reserved. E&OE.
Updated November 2019
For more information: www.dlink.com
Nuclias Connect Network Management Features
WLAN Management
Maximum APs per Installation
5
• 1,000 (large scale installations) • 100 (small scale installaions)
WLAN Management Features • AP grouping
• Multi-tenancy
• Visualized topology
• NAT pass-through
• Setup wizard
• AP discovery (layer 2 and layer 3)
• Report system
User Authentication
Guest Portal • Captive portal
Authentication Method • Local
• POP3
• RADIUS
• LDAP
• Voucher
Hotspot Features • Built-in support for voucher-based authentication
• Built-in hotspot manager for voucher
creation and guest management
• Rate limiting and bandwidth control
for guest and hotspot portal
Wireless Features
RF Management and Control • Auto Output Power Control
• Auto Channel
• Self-healing around failed APs
Multiple SSIDs per Radio(AP)
• 8
Advanced Wireless Features • Band steering
• L2 roaming
• Bandwidth optimisation
• Airtime fairness
System Management
Management Interface • Web-based user interface (HTTPS)
Minimum System Requirements • Computer running Microsoft Windows 10 or server 2016 (64 bit)
Scheduling • Firmware update • Configuration update
Supported Devices
Indoor Wireless N Access Points • DAP-2230 (Single-Band N300, F/W ver. 2.0) • DAP-2310 (Single-Band N300, F/W ver. 2.0)
Indoor Wireless AC Access Points • DAP-2360 (Single-Band N300, F/W ver. 2.0)
• DAP-2610 (Dual-Band Wave 2 AC1300, F/W ver. 2.0)
• DAP-2620 (Dual-Band Wave 2 AC1200, in-wall design)
• DAP-2660 (Dual-Band AC1200, F/W ver. 2.0)
• DAP-2662 (Dual-Band Wave 2 AC1200, WiFi4EU-ready)
• DAP-2680 (Dual-Band AC1200, F/W ver. 2.0)
• DAP-2695 (Dual-Band AC1750, F/W ver. 2.0)
Outdoor Access Points • DAP-3315 (Single-Band N300, F/W ver. 2.0)
• DAP-3362 (Dual-Band AC1200, F/W ver. 2.0)
• DAP-3666 (Dual-Band Wave 2 AC1200, WiFi4EU-ready)
1
Maximum wireless signal rate derived from IEEE standard 802.11 and 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building
materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely aect wireless signal range.
2
This unit is designed for indoor environments, you might violate local regulatory requirements by deploying this unit in outdoor environments.
3
Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The DAP-2620 may not support the 5.25-5.35 GHz and 5.47-5.725 GHz frequency ranges in certain regions.
This product is based on draft IEEE 802.11ac specications and is not guaranteed to be forward compatible with future versions of IEEE 802.11ac specications. Compatibility with 802.11ac devices from other manufacturers is not
guaranteed. All references to speed and range are for comparison purposes only. Product specications, size, and shape are subject to change without notice, and actual product appearance may dier from that depicted herein.
4
Available Q2, 2020.
5
Number of wireless access points supported depends on the specication of the computer on which DNC is installed. To support 1000 APs, a computer with at least an Intel Core i7 with 16 GB RAM and 4 TB hard drive, and 20
Mbps uplink bandwith is recommended. To support 100 APs, a computer with at least an Intel Core i5 3.2GHz with 8 GB RAM and 2 TB hard drive, and 10 Mbps uplink bandwith is recommended.