User manual

32D-Link DAP-2553 User Manual
Section 3 - Configuration
The device supports up to four multiple Service Set Identiers. In the Basic > Wireless section, you can set the Primary
SSID. The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Check to enable support for multiple SSIDs.
This read-only value is the current band
setting.
You can select up to three multi-SSIDs. With
the Primary SSID, you have a total of four
multi-SSIDs.
Service Set Identier (SSID) is the name
designated for a specic wireless local area
network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily
changed to connect to an existing wireless
network or to establish a new wireless
network.
Enable or Disable SSID visibility. Enabling
this feature broadcasts the SSID across the
network, thus making it visible to all network
users.
The Multi-SSID security can be Open System,
WPA-Personal, or WPA-Enterprise. For a
detailed description of the Open System
parameters, please go to page 23. For a
detailed description of the WPA-Personal
parameters, please go to page 24. For a
detailed description of the WPA-Enterprise
parameters, please go to page 25.
Enable
Multi-SSID:
Band:
Index:
SSID:
SSID Visibility:
Security:
Multi-SSID